 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ACTIVE SIGNAL AMPLIFIER Iin &Iout T11/12/21/22_D/S DESCRIPTION The series is a high integration, high efficiency polygonal - line active isolation amplifier module, with anterior circuit current signal input and posterior current signal output. These modules are embed with a high efficiency isolated micro-power source, which can provide a electrics-feed for signal input. In the two-wire three-wire and four-wire circuit applications, our products largely predigest customers' design helpfully improve the using room ratio of PCB. Adopting electromagnetism isolation technology, it is available to keep high accuracy and natural extrem ely low temperature drift. The isolation voltage among the input, output, power supply and isolated power output can up to 2.5KVDC. Isolation Power Output Data Power Supply Data PRODUCT PROGRAM Part Number T1133D/S T1130D/S T1230D/S T2133D/S T2233D/S T2230D/S Power Supply 24V 24V 24V 24V 24V 24V Input 4-20mA 4-20mA 4-20mA 0-20mA 0-20mA 0-20mA Output 4-20mA 4-20mA 0-20mA 4-20mA 0-20mA 0-20mA Isolation Channels Power Output 24V NONE NONE 24V 24V NONE 1 1 1 1 1 1 Note: We could also offer customer design for special input and output. ELECTRICAL CHARACTERISTICS Power Supply Power consumption Power Protection Output Voltage Output Current Input Signal Input Data Input Impedance Overload Output Data Output Signal Load (Nominal Power Supply) 5% 2W Reverse protection (Nominal) 10% 25mA See above Voltage Drop250mV(At input=20mA) 300mA See above 500At output=20mA FEATURES Four-port isolationAmong input, output, power supply and Isolation Power output High accuracy (0.1% F.S.) High linearity (0.1% F.S.) Isolation voltage(2500VDC/60S) High frequency response(15KHz) Extremely low temperature(35PPM/C) Industry standard(Operating Temperature Range:-25C to 71C) High reliability(MTBF500,000 hours) TRANSMISSION CHARACTERISTICS Offset Gain Error Temperature Drift 0.1%F.S. 0.1%F.S. 0.0035%F.S./ (-25C to +71 C) ISOLATION CHARACTERISTICS MODEL SELECTION Galvanic Isolation Isolation Voltage Package style Isolation power output Power supply Output Input Isolation Amplifier TXXXXD Four-port isolation Among input, output, power supply and Isolation Power output 2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%) 1000M, 500VDC(Among signal input, signal output, power supply and isolation power output) Insulation Resistance OTHER CHARACTERISTICS Ambient temperature Package Operation temperature:-25 to +71 Transport and Storage temperature:-50 to +105 DIP24/SOIC24 About 10g No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Weight The Environment in use Note: 1. All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions. The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T11/12/21/22_D/S A/2-2008 Page 1 of 2 SCHEMATIC DIAGRAM 24Power supply 23+ 13Isolation Power Output 14+ Iin12Signal i nput 11+ Ii n+ Iout+ 2+ Si gnal output 1- APPLICATION NOTE 1. Please read instruction book carefully before using the product. If you have any question, please contact with our technical support. 2. Please don't install in the dangerous zone. 3. The power supply is direct voltage. 220V alternating current is forbidden.. 4. Don't divide the product privately in case the equipments ineffective or go wrong. Iout- AFTER SERVICE APPLICATION CIRCUIT DIAGRAM Power Supply Isolation Power Out put 1. Products are carefully inspected and controlled before going out from our factory. If they operated abnorm ally or there were something wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. 2. 3 years warranty since the delivery date. During the period of quality guaranteeour company normally will repair or change free of charge if product has any quality problem in the process of using. 24 23 22 21 20 PinPin+ NC NC NC 16 15 14 13 NC NC PoutPou t+ NC NC Sin+ Sin- SoutSou t+ NC NC NC TxxxxD 9 10 11 12 12345 Out put Input APPLICATION CIRCUITS See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. First Angle Projection PACKAGING SIZE AND TERMINAL DESCRIPTION SOIC Package 10.20 (0.397) 10.20 (0.397) DIP Package 0.70 (0.028) 32.30(1.272) 18.60(0.732) 14.40 (0.560) 4.00 (0.157) 27.94(1.100) 32.30(1.272) (0.028) 0.30 (0.012) 1.150.15 24 23 22 21 20 16 151413 14.40 (0.560) RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) 19.24(0.757) 24232221 20 1615 1413 2.00 (0.079) Vin- Vin- 12345 9 1011 12 12345 9 1011 12 1.00 (0.039) FOOTPRINT DETAILS PIN FUNCTION OutputOutput+ Input+ Isolation Power Output- PIN FUNCTION Isolation Power Output+ Power Supply+ 24(Vin-) Others Power SupplyNC NC:No Connection Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances:0.10mm(0.004inch) General tolerances :0.25mm( 0.010inch) The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T11/12/21/22_D/S A/2-2008 Page 2 of 2 0.65 (0.026) |
Price & Availability of T1230DS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |